Turbo Air appliance service for Greater Houston commercial kitchens.
- Fault found before any price
- One fixed price you approve
- 90-day parts warranty
Phones answered now
- 1You callany hour
- 23-hour windowagreed with you
- 3Fixed pricebefore any work
Free to request · 3 steps
Request a repair appointment
Takes about a minute. There is no charge to submit a request.
- Diagnosis
- The cause is identified before any price is given
- Approval
- One fixed price, and work begins only with your consent
- Hours
- Our phones are answered 24 hours a day
- Warranty
- Parts warranted for 90 days, labor for 30
Commercial
Turbo Air equipment our technicians service
Common Turbo Air failure points
- A warm pan rail even though the cabinet beneath remains cold
- Condenser clogged despite the self-cleaning feature
- Door or lid gaskets no longer sealing
- Evaporator fan motor failure
- Blocked drain line in the cabinet base
The line-up
The Turbo Air line-up, unit by unit
Turbo Air is a commercial refrigeration manufacturer of Korean origin with its United States operations based in Southern California. It is known for competitively priced reach-ins, prep tables, under-counters and display merchandisers for foodservice and retail.
| Refrigerator | Turbo Air reach-in refrigerators come in solid and glass-door versions across one-, two- and three-section cabinets. |
|---|---|
| Refrigerator | Its sandwich, salad and pizza prep tables pair a refrigerated pan rail with cabinet storage underneath, which makes them the workhorse of many lines. |
| Freezer | Turbo Air reach-in and under-counter freezers share many components with the refrigerated cabinets but depend more heavily on a working defrost cycle. |
Turbo Air installation and access
In a working kitchen a Turbo Air cabinet is usually wedged between other equipment, often beside a fryer or range that raises the air temperature around its condenser. Our technicians check side and rear clearance and may ask staff to empty a section so the evaporator panel can come off. Visits are arranged around service where the client's schedule allows.
Common Turbo Air faults and what we check
- The reach-in loses temperature during the dinner rush and recovers overnightRefrigerator
- Frequent door openings expose weak gaskets, sagging doors and a fouled condenser, so these are checked before the controls or refrigerant circuit.
- The coil behind the rear panel is encased in frostFreezer
- The defrost heater, termination sensor and controller defrost settings are tested, as an incomplete defrost lets ice accumulate cycle after cycle.
- A puddle forms on the cabinet floorRefrigerator
- A clogged drain line or a displaced evaporator drain pan is the usual finding in kitchens where food debris enters the cabinet.
- The compressor never stops yet the box stays above set pointFreezer
- Condenser airflow and fan motors are verified first; only after that is the refrigerant charge and sealed system assessed.
Looking after Turbo Air equipment between visits
- 01Brush the condenser periodically even if the model has a self-cleaning feature.
- 02Close prep table lids whenever the rail is not in active use.
- 03Wipe door gaskets at the end of each shift and report tears early.
- 04Keep pans at the level the rail was designed for so cold air reaches them.
Commercial equipment
Service notes for Turbo Air equipment
Turbo Air manufactures restaurant refrigeration. Our technicians most often clean coils, replace evaporator or condenser fan motors and worn door gaskets, and repair defrost faults and electronic controllers.
- Reach-in fridges and freezers
- Prep tables
- Undercounter units
- Glass-door merchandisers
- Open display cases
Safe checks to make before calling
- • If the cabinet is warm and the compressor runs constantly, clean the condenser coil first, since that is where the problem most often begins.
Technical notes
What Turbo Air repairs involve
Turbo Air reach-ins, sandwich and pizza prep tables, worktops, under-counters and glass-door merchandisers, whether refrigerator or freezer, are repaired by our technicians.
Airborne cooking grease does more harm to commercial refrigeration than anything else, because a coated condenser forces the compressor to work hot and can shorten its life by years. Turbo Air work is best scheduled around service hours, so give the dispatcher the kitchen's quiet periods when you book. Turbo Air produces food-service refrigeration, and some of its lines include a self-cleaning condenser, which lessens the need for routine cleaning without removing it.
Questions
Questions about Turbo Air repair
Why is the pan rail warm when the cabinet is cold?
The rail and the cabinet depend on airflow that is easily disrupted by open lids, overfilled pans or a blocked air path. Our technicians examine those factors before concluding that the refrigeration system is at fault.
Does a self-cleaning condenser still need attention?
It slows the buildup of lint and grease but does not eliminate it, particularly near fryers. A periodic inspection keeps the unit from overheating during long services.
Arrange Turbo Air service
Tell us whether the Turbo Air rail, the cabinet or both are warm, and how close the unit sits to the fryers or grill.