Ice-O-Matic appliance service for Greater Houston commercial kitchens.
- Fault found before any price
- One fixed price you approve
- 90-day parts warranty
Phones answered now
- 1You callany hour
- 23-hour windowagreed with you
- 3Fixed pricebefore any work
Free to request · 3 steps
Request a repair appointment
Takes about a minute. There is no charge to submit a request.
- Diagnosis
- The cause is identified before any price is given
- Approval
- One fixed price, and work begins only with your consent
- Hours
- Our phones are answered 24 hours a day
- Warranty
- Parts warranted for 90 days, labor for 30
Commercial
Ice-O-Matic equipment our technicians service
Common Ice-O-Matic failure points
- A bin level control fault that is mistaken for a production problem
- Scale in the water circuit cutting output
- Clogged condenser on air-cooled heads
- Water inlet or float valve faults
- Ice remaining frozen to the evaporator after a failed harvest
The line-up
The Ice-O-Matic line-up, unit by unit
Ice-O-Matic is an American commercial ice machine brand, focused exclusively on ice production and dispensing equipment. Its machines are widely used in restaurants, bars, hotels and healthcare settings.
| Ice Maker | Ice-O-Matic produces modular cubers, flakers, nugget-ice machines and compact self-contained units for various production needs. |
|---|
Ice-O-Matic installation and access
Ice-O-Matic heads typically sit on top of bins or dispensers in back rooms, kitchens or bars where space and ventilation are limited. Remote condenser systems may involve a rooftop or exterior unit, and our technicians ask clients about the configuration in advance so access can be arranged.
Common Ice-O-Matic faults and what we check
- The ice is thin or the cubes are not fully formed.Ice Maker
- Water supply pressure, the water distribution tube, scale on the evaporator and the harvest timing controls are checked.
- Water leaks onto the floor around the machine.Ice Maker
- Technicians inspect the drain lines and their slope, the water trough, and any cracked tubing or fittings.
- The machine shuts off and will not restart.Ice Maker
- Safety limits such as high-pressure cutouts, often triggered by a dirty condenser or failed fan, and the controller are examined.
- The ice has an unpleasant taste or odor.Ice Maker
- Sanitation, the condition of the water filter and the incoming water quality are reviewed.
Looking after Ice-O-Matic equipment between visits
- 01Clean and sanitize the machine and bin on a regular schedule.
- 02Replace water filter cartridges according to the recommended interval.
- 03Keep air-cooled condensers clear of dust and grease.
- 04Check that drain lines are properly sloped and free of obstructions.
Commercial equipment
Service notes for Ice-O-Matic equipment
Ice-O-Matic manufactures ice machines for restaurants, bars and offices. Calls usually concern production that has slowed or stopped, cubes that remain attached to the plate at harvest, or pumps, float switches and scale. Mineral content varies between city surface water and suburban well or MUD supplies, so descaling and the water filter are addressed first.
- CIM and ICE series cubers
- Nugget and flake ice machines
- Undercounter ice machines
- Ice dispensers
Safe checks to make before calling
- • If the filter cartridge is past its replacement date, change it. Then describe the ice to us, whether thin, cloudy or absent, as this narrows down the cause.
Technical notes
What Ice-O-Matic repairs involve
Ice-O-Matic makes only ice equipment, so our work for the brand is its ice machines: air-cooled, water-cooled and remote-condenser heads and their bins.
Ice-O-Matic supplies commercial ice machines to the food-service trade, and as with any commercial ice maker its lifespan is governed more by water treatment than by component quality. Weak production, small cubes and sluggish harvest cycles on an Ice-O-Matic are far more likely to reflect scale in the water circuit or a soiled condenser than a defective part. Regular descaling and sanitizing allow an Ice-O-Matic head to keep producing for a decade rather than only a few years.
Questions
Questions about Ice-O-Matic repair
How do I know if the bin is full or the machine has failed?
If the bin is not full and the machine has stopped producing, a fault is likely. Our technicians check the bin control first because it is a frequent cause of apparent production failure.
Does a remote condenser need maintenance?
Yes. Outdoor or rooftop condensers collect debris and should be inspected and cleaned periodically to maintain production.
Arrange Ice-O-Matic service
Tell us whether the Ice-O-Matic bin is full, part full or empty, and when the water filter was last changed.