Jump to main content

Appliance repair across Greater Houston

Hobart logo

Hobart appliance service for Greater Houston commercial kitchens.

Hobart dishmachines rely on a booster heater for a sanitizing rinse, and scale builds in that heater and the arms. Our technician diagnoses the machine in your kitchen and agrees the cost first.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Commercial

Hobart equipment our technicians service

Common Hobart failure points

  • Scale deposits in the booster heater and across the rinse arms
  • Blocked wash or rinse jets
  • Sticking fill or drain valve
  • Chemical pump or dosing faults
  • Worn doors or curtains on conveyor machines

The line-up

The Hobart line-up, unit by unit

Hobart is a long-established American commercial food equipment brand with roots in Troy, Ohio, and part of ITW's food equipment group. Its range spans warewashing, food preparation and weighing equipment for professional kitchens.

DishwasherHobart's warewashing line includes under-counter machines, door-type units and conveyor systems for high-volume operations.

Hobart installation and access

Hobart dishmachines are connected to hot water, drain, chemical supplies and often a booster heater, and they are sited within tight dish rooms. Our technicians need access to the water heater, chemical lines and electrical disconnect, and service is easier when the dish area is cleared of racks beforehand.

Common Hobart faults and what we check

Dishes come out with spots or a chalky film.Dishwasher
Water hardness, chemical dosing and rinse arm spray patterns are checked, and the machine is examined for scale buildup.
The machine does not fill or fills very slowly.Dishwasher
The fill solenoid, line strainer, water pressure and float or level controls are inspected.
The final rinse does not reach the required temperature.Dishwasher
The booster heater element, thermostat and incoming water temperature are checked, along with scale on the heater.
A conveyor machine stops moving racks partway through.Dishwasher
The conveyor drive, its safety clutch, and any jammed rack or debris in the track are inspected.

Looking after Hobart equipment between visits

  1. 01Delime on a schedule appropriate to the hardness of the incoming water.
  2. 02Clean wash and rinse arms and remove debris from nozzles daily.
  3. 03Drain and clean the tank at the end of each service day.
  4. 04Check chemical containers and dosing lines regularly.

Commercial equipment

Service notes for Hobart equipment

Hobart builds slicers and mixers as well, but our Hobart work is its dishmachines, whose final rinse must reach a sanitizing temperature. Typical faults are low wash or rinse temperature from the booster heater or its thermostat, pumps, and fill or drain valves. Visits can be booked around your service hours where the schedule allows.

  • LXe undercounter dishmachines
  • AM series door-type dishmachines
  • Conveyor dishmachines

Safe checks to make before calling

  • • If the rinse is not reaching temperature, measure the incoming hot water first. If that is adequate, the booster heater is the next component to examine.

Technical notes

What Hobart repairs involve

Hobart makes dishmachines for working kitchens, and that is the equipment we repair for this maker, including the conveyor machines used in busier operations.

Hobart machinery is intended to be overhauled rather than discarded, and the manufacturer keeps parts available for a long period. Hobart supplies dishwashing and food-preparation machinery to professional kitchens, designed for continuous commercial duty rather than domestic cycles. Service on a Hobart dishwasher generally involves door seals, the booster heater, or the wash and rinse arms, along with a review of water treatment, since scale is the most damaging condition a commercial dishwasher faces.

Questions

Questions about Hobart repair

How often should a Hobart dishmachine be delimed?

It depends on water hardness and usage. In hard-water areas deliming may be needed weekly or more, while softened water extends the interval.

Do you work on Hobart mixers and slicers?

Our service for Hobart is focused on warewashing equipment. Clients with other Hobart equipment should contact us to confirm before booking.

Arrange Hobart service

Tell us the Hobart model, whether it is undercounter, door-type or conveyor, and what the rinse gauge reads.

Call, any hour(832) 476-8009Book on the web