Jump to main content

Appliance repair across Greater Houston

Atosa logo

Atosa appliance service for Greater Houston commercial kitchens.

Atosa reach-ins and prep tables draw in kitchen air, and grease clogs their condensers. Our technician diagnoses the cabinet in your restaurant and agrees one fixed price before the repair starts.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Commercial

Atosa equipment our technicians service

Common Atosa failure points

  • Condenser clogged by greasy kitchen air
  • Door gaskets flattened by constant use
  • Evaporator fan motor failure
  • Water collecting in the cabinet because the drain line is obstructed
  • Controller or probe reading the cabinet wrong

The line-up

The Atosa line-up, unit by unit

Atosa is a commercial foodservice equipment brand whose catalog centers on refrigeration and cooking equipment for restaurants and other food businesses. It is known for offering stainless commercial units at a level accessible to smaller operators.

RefrigeratorAtosa reach-in, under-counter and prep-table refrigerators are self-contained units built for constant door traffic.
FreezerThe freezers follow the same cabinet construction, with defrost handled automatically on a timed or controller-driven schedule.
Ice MakerAtosa's ice machines are modular or self-contained units intended for smaller foodservice volumes.

Atosa installation and access

In a working kitchen, a refrigeration unit is often wedged between cooking lines or set beneath a counter where heat and grease surround the condenser. Our technicians plan visits around service hours when possible, and units on casters can usually be rolled out for full access to the rear and base.

Common Atosa faults and what we check

The prep table holds temperature overnight but runs warm during service.Refrigerator
Technicians check condenser cleanliness, ambient heat near the cooking line, and the pan rail lids, since open lids and nearby heat overwhelm the system at peak hours.
Ice builds on the rear panel and product near the back softens.Freezer
An incomplete defrost is suspected, and the defrost heater, termination sensor and controller settings are verified.
The machine runs but the bin fills slowly.Ice Maker
Scale in the water circuit, a restricted inlet, and an air-cooled condenser loaded with kitchen grease are the first areas checked.
The compressor runs almost constantly.Refrigerator
Door alignment, gasket seal, condenser airflow and the evaporator fan are reviewed before the refrigerant charge is considered.

Looking after Atosa equipment between visits

  1. 01Brush or vacuum the condenser on a set schedule, more often near fryers and grills.
  2. 02Wipe gaskets daily and replace any that are torn or no longer seal.
  3. 03Keep product clear of the evaporator fan so air can circulate.
  4. 04Descale and sanitize the ice machine at intervals suited to local water.

Commercial equipment

Service notes for Atosa equipment

Atosa manufactures refrigeration for restaurant kitchens and bars. A warm cabinet usually has one of a few causes: a condenser coil coated in grease and dust, an evaporator fan that has stopped, a worn door gasket, a defrost fault or a failed electronic controller.

  • Reach-in fridges and freezers
  • Sandwich and pizza prep tables
  • Undercounter and worktop units
  • Bar coolers
  • Ice machines

Safe checks to make before calling

  • • Brushing the condenser coil behind the front grille once a month prevents a large share of warm-cabinet problems.

Technical notes

What Atosa repairs involve

In restaurant and café kitchens, we repair Atosa commercial refrigerators and freezers, including reach-ins, under-counters and prep tables, plus Atosa ice machines.

An Atosa unit out of service means lost revenue for the business, so where your kitchen's schedule permits we aim to book the work outside trading hours. Atosa produces economical commercial refrigeration and cooking equipment for food-service operators, and our technicians service it according to commercial practice, not as household equipment. Atosa refrigeration faults typically trace to a condenser fan motor, a deteriorated door gasket or a grease-laden coil, all of which are maintenance matters rather than manufacturing defects.

Commercial Atosa service in Greater Houston

Because Atosa equipment serves commercial operations, a failure costs the business revenue as well as convenience. When you book, say which hours the unit can be taken out of service, so the appointment in Greater Houston can be arranged around them where the schedule allows.

Commercial refrigeration and ice equipment also carries food-safety obligations that do not arise in a household. Keeping stock at the correct temperature is a compliance matter, so the cause of a warm cabinet matters as much as the repair. Where the underlying cause is maintenance, whether a grease-laden condenser, a door gasket past its service life or scale in the water circuit, our technician states it clearly, because otherwise the same fault will recur.

Questions

Questions about Atosa repair

What should we do while an Atosa cabinet is running warm?

Move product to a unit that is holding 41°F or below, the Food Code's cold-holding limit, keep the door closed, and note the readings and times. That log shows the technician when the problem started and whether it follows the busy hours.

Why does our unit keep failing in summer?

Higher kitchen temperatures and a dirty condenser reduce the system's capacity just when demand is highest. Correcting airflow and cleaning are often the remedy before any part is changed.

Arrange Atosa service

Tell us which Atosa unit has failed, reach-in, prep table or ice machine, and the temperature the product is reading.

Call, any hour(832) 476-8009Book on the web