Jump to main content

Appliance repair across Greater Houston

GE Appliances logo

GE appliance service in Greater Houston homes.

GE refrigerators that warm while the freezer stays cold usually have an iced coil from a failed defrost heater or thermostat, not a dying compressor. We confirm it in person and quote before starting.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Mass Market

GE appliances our technicians service

Common GE Appliances failure points

  • Evaporator coil icing from a failed defrost heater or defrost thermostat
  • Evaporator fan motor stopped
  • Water valve and dispenser faults
  • Oven temperature sensor reading wrong
  • A welded or burnt relay in the element circuit of the control board

Error codes

GE error codes explained

GE codes, grouped by appliance. A code shows where testing starts, not which part failed; we check it on your unit first.

  • GE Profile
  • Café
  • Monogram
  • Top-load and front-load laundry
  • Fridges built since the 2016 Haier purchase

GE Appliances oven

F1
A fault within the electronic oven control.
F2
The oven temperature has exceeded its limit, a condition known as runaway temperature.
F3
The oven temperature sensor is reading as an open circuit.
F4
The oven temperature sensor is reading as a short circuit.
F7
The control is reading a touchpad key as held down.
F9
The door lock is malfunctioning, which is usually noticed when a self-clean cycle is started.

GE Appliances range

F3 / F4
The range's oven sensor is reading as an open circuit (F3) or a short circuit (F4).

Safe checks to make before calling

  • • When an oven shows an F code, switch off its breaker for five minutes. If the code returns once power is restored, a sensor or the control board is the probable cause.
  • • When a GE refrigerator section is warm while the freezer stays cold, the cause is almost always a defrost fault.

Technical notes

What GE repairs involve

We repair the full GE household range: refrigerators, freezers, wine coolers, dishwashers, washers and dryers, plus ovens, cooktops, stoves, ranges and microwaves, including Profile, Café and Monogram models.

GE Appliances uses an independent platform rather than Whirlpool's; components are shared with Hotpoint and with GE's premium lines, which means a GE control board cannot be fitted to a Whirlpool, however similar the two may appear. The defrost system is frequently the first thing to fail in a GE refrigerator: a faulty defrost heater or defrost thermostat lets ice encase the evaporator, the fan can no longer move air across it, and the freezer stays cold while the fresh-food section warms, a symptom that is easily misinterpreted. GE front-load washers and GE dishwashers report faults through GE's proprietary code system, and an accurate reading of that code is what distinguishes a sensor replacement from a board replacement.

GE Appliances components and the platform behind them

GE Appliances has been owned by Haier since 2016, but it still runs its own engineering platform rather than Haier's, and shares it with Hotpoint and with its Profile, Café and Monogram lines. Parts and service procedures therefore carry across those GE names, and GE's documentation and fault-code system apply to all of them.

Questions

Questions about GE repair

What does the F1 code on a GE oven indicate?

A fault within the electronic oven control.

What does the F2 code on a GE oven indicate?

The oven temperature has exceeded its limit, a condition known as runaway temperature.

What does the F3 code on a GE oven indicate?

The oven temperature sensor is reading as an open circuit.

Arrange GE service

Note any F code your GE oven or range is showing, and whether the model is GE, Profile, Café or Monogram.

Call, any hour(832) 476-8009Book on the web