Jump to main content

Appliance repair across Greater Houston

Frigidaire logo

Frigidaire appliance service in Greater Houston homes.

Frigidaire door dispensers often fail where their wiring flexes through the hinge. We trace the fault at your home, match the board to the full model number, and quote a single price first.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Mass Market

Frigidaire appliances our technicians service

Common Frigidaire failure points

  • Dispenser faults from wiring that fractures where it passes through the door hinge
  • Defrost faults letting the coil ice over
  • Clogged drain pump
  • Oven temperature sensor reading wrong
  • Control boards that differ between the standard, Gallery and Professional ranges

Error codes

Frigidaire error codes explained

Frigidaire codes, grouped by appliance. A code shows where testing starts, not which part failed; we check it on your unit first.

  • Frigidaire Gallery
  • Frigidaire Professional
  • Laundry and ranges on the Electrolux platform

Frigidaire oven

F10
The oven is overheating. The temperature sensor or a relay on the control board is the likely cause.
F11
A touchpad key is shorted.
F30
The oven temperature sensor is reading as an open or short circuit.
F90
A fault in the motor that drives the door lock.

Frigidaire washer

E11
The washer is not filling correctly. Check the tap, the fill hose and the water inlet valve.
E21
The washer is draining too slowly. Check the drain pump, its filter and the hose.
E35
The washer has detected an excessive water level.
E41
The door is open, or the door switch has failed.

Frigidaire dishwasher

i10
The dishwasher is failing to fill.
i20
The dishwasher is failing to drain.
i30
The sensor in the base has detected a leak.

Safe checks to make before calling

  • • Frigidaire is the principal Electrolux brand, and the two share many components.

Technical notes

What Frigidaire repairs involve

Frigidaire households can call us about refrigerators, freezers, washers, dryers and dishwashers, or about ovens, ranges, stoves, cooktops and microwaves, including the Gallery and Professional lines.

Frigidaire products share the Electrolux platform, so components and service procedures carry over between the two brands and replacement parts are usually simple to source. The Frigidaire Gallery and Professional series use control electronics that differ from the base line, even where mechanical components are identical, so the exact model number matters more on a Frigidaire range or refrigerator than on most makes. Complaints about the door-mounted ice and water dispenser are common on Frigidaire side-by-side refrigerators, and the fault often lies in the wiring harness, which flexes at the hinge each time the door opens, rather than in the dispenser.

Questions

Questions about Frigidaire repair

What does the F10 code on a Frigidaire oven indicate?

The oven is overheating. The temperature sensor or a relay on the control board is the likely cause.

What does the F11 code on a Frigidaire oven indicate?

A touchpad key is shorted.

What does the F30 code on a Frigidaire oven indicate?

The oven temperature sensor is reading as an open or short circuit.

Arrange Frigidaire service

Read us any code your Frigidaire shows, such as E21 on a washer or i20 on a dishwasher, with the full model number.

Call, any hour(832) 476-8009Book on the web