Hoshizaki appliance service for Greater Houston commercial kitchens.
- Fault found before any price
- One fixed price you approve
- 90-day parts warranty
Phones answered now
- 1You callany hour
- 23-hour windowagreed with you
- 3Fixed pricebefore any work
Free to request · 3 steps
Request a repair appointment
Takes about a minute. There is no charge to submit a request.
- Diagnosis
- The cause is identified before any price is given
- Approval
- One fixed price, and work begins only with your consent
- Hours
- Our phones are answered 24 hours a day
- Warranty
- Parts warranted for 90 days, labor for 30
Commercial
Hoshizaki equipment our technicians service
Common Hoshizaki failure points
- Scale on the vertical evaporator causing poorly formed cubes
- Restricted water circuit or pump
- Hot-gas harvest valve faults
- Condenser clogged by kitchen air
- Float switch or water level faults
The line-up
The Hoshizaki line-up, unit by unit
Hoshizaki is a Japanese manufacturer of commercial ice machines, refrigeration and other foodservice equipment, with a major presence in the American market. The brand is particularly associated with ice machines of distinctive cube quality and durability.
| Ice Maker | Hoshizaki ice machines include cubers, flakers and nugget-ice models in modular and self-contained formats. |
|---|---|
| Refrigerator | Its commercial refrigerators include reach-ins, under-counters and prep tables with stainless construction. |
| Freezer | The freezers match the refrigerator cabinets and are built for the demands of a busy kitchen. |
Hoshizaki installation and access
Ice machines are often installed in back rooms, bars or beneath counters where heat and limited airflow reduce production. Our technicians examine the water supply, filtration, drain line and condenser clearance as part of every visit, since installation conditions affect output as much as the machine itself.
Common Hoshizaki faults and what we check
- Ice cubes come out cloudy or hollow.Ice Maker
- Water quality, filtration, scale buildup on the evaporator and water flow across the plate are checked.
- The machine runs but harvests rarely or not at all.Ice Maker
- The hot-gas valve, the harvest controls and thermistor, and the water pump are examined.
- Condensation forms on the exterior around the doors.Refrigerator
- The door seal, door alignment and humidity in the kitchen are reviewed.
- The freezer cycles frequently and runs warm.Freezer
- The condenser condition, the evaporator fan and the defrost system are inspected.
Looking after Hoshizaki equipment between visits
- 01Replace water filters on schedule, particularly in areas with hard water.
- 02Have the ice machine descaled and sanitized at regular intervals.
- 03Keep the condenser clean and the area around the machine well ventilated.
- 04Inspect the drain line for slow drainage or blockages.
Commercial equipment
Service notes for Hoshizaki equipment
Hoshizaki is best known for commercial ice machines. We are usually called when production falls, when cubes are thin or cloudy, or when scale, a water pump or a water filter is at fault. Houston-area water is moderately hard and varies by supply, so scale on the evaporator is the usual reason output drops; a restaurant or bar that skips filter changes and descaling sees it sooner.
- KM series cubers
- Flake and nugget ice machines
- Undercounter ice makers
- Reach-in refrigeration
Safe checks to make before calling
- • If the machine is producing less ice than normal, change the water filter first and then arrange a descaling visit.
Technical notes
What Hoshizaki repairs involve
We repair Hoshizaki cubers and its other commercial ice machines, along with the reach-in refrigerators and freezers this Japanese maker builds to accompany them.
Adherence to the manufacturer's cleaning interval largely determines whether an ice machine gives a decade of service or fails within three years. Hoshizaki ice machines have a stainless evaporator and an integrated cleaning cycle, and problems usually originate from scale or biofilm on the water side rather than from a failed component. Reduced output, undersized cubes or cloudy ice from a Hoshizaki nearly always indicate that the water circuit requires descaling and sanitizing, not replacement parts.
Questions
Questions about Hoshizaki repair
How often should a Hoshizaki ice machine be cleaned?
Most operators benefit from descaling and sanitizing at least twice a year, and more often with hard water or heavy use. Our technicians can recommend an interval based on the site.
Why is my ice machine producing less ice than before?
Scale, a dirty condenser or higher room temperatures commonly reduce output. Measuring production against the rated output helps determine whether a part has failed.
Arrange Hoshizaki service
Tell us roughly how much ice the Hoshizaki makes now against what it used to, and when it was last descaled.