Manitowoc appliance service for Greater Houston commercial kitchens.
- Fault found before any price
- One fixed price you approve
- 90-day parts warranty
Phones answered now
- 1You callany hour
- 23-hour windowagreed with you
- 3Fixed pricebefore any work
Free to request · 3 steps
Request a repair appointment
Takes about a minute. There is no charge to submit a request.
- Diagnosis
- The cause is identified before any price is given
- Approval
- One fixed price, and work begins only with your consent
- Hours
- Our phones are answered 24 hours a day
- Warranty
- Parts warranted for 90 days, labor for 30
Commercial
Manitowoc equipment our technicians service
Common Manitowoc failure points
- Full bin mistaken for a production failure
- Mineral scale coating the evaporator plate and the water distribution parts
- Remote condenser faults away from the machine
- Harvest faults that leave a bridge of ice across the evaporator plate
- Water inlet or purge valve faults
The line-up
The Manitowoc line-up, unit by unit
Manitowoc Ice is a Wisconsin maker of commercial ice machines and part of Welbilt, which Italy's Ali Group acquired in 2022. It is one of the most widely installed names in restaurant, hotel and institutional ice production.
| Ice Maker | Manitowoc modular cube machines place the ice-making head on a separate bin, allowing production capacity and storage to be sized independently. |
|---|---|
| Ice Maker | Manitowoc also offers self-contained under-counter units and ice-and-beverage dispensers for operations with less floor space. |
Manitowoc installation and access
Modular Manitowoc heads are often mounted high on a bin in a back corridor, storeroom or bar alcove, so our technicians bring suitable ladders and confirm service clearance above the unit. Water-cooled models connect to a separate supply and drain, and the condition of that water loop matters as much as the machine itself. Clients are asked to note whether the unit is air-cooled, water-cooled or remote when booking.
Common Manitowoc faults and what we check
- The machine runs but the ice slab is thin and cloudyIce Maker
- Our technicians examine the water distribution tube and the water pump, and check for scale that disrupts the flow across the evaporator.
- The unit stops in the middle of the day and will not restart on its ownIce Maker
- The controller's indicators are read first, then the bin switch, high-pressure cut-out and condenser airflow are checked.
- Water spills into the bin and leaves soft clumps of iceIce Maker
- A leaking or sticking water inlet valve, an overflowing trough or a blocked drain at the dump valve are typical findings.
- Production is far below normal in warm weatherIce Maker
- On air-cooled machines a dirty condenser or poor room ventilation is checked; on remote systems the condenser fan and outdoor coil are inspected.
Looking after Manitowoc equipment between visits
- 01Follow the manufacturer's cleaning and sanitizing procedure at the interval the maker recommends, more often where water is hard.
- 02Keep the air-cooled condenser clear of dust and grease.
- 03Replace the inlet water filter cartridges on schedule.
- 04Keep the drain line from the bin free of slime and obstructions.
Commercial equipment
Service notes for Manitowoc equipment
Manitowoc ice machines report faults on their built-in display. Typical calls involve low output, freeze-ups, harvest problems, water pumps and scale. A thorough descale and sanitizing resolves more Manitowoc problems than any replacement part.
- Indigo NXT cubers
- Undercounter ice machines
- Flake and nugget ice machines
- Ice and beverage dispensers
Safe checks to make before calling
- • Note the message on the display before calling, as it indicates which part our technician should bring.
Technical notes
What Manitowoc repairs involve
Manitowoc modular ice machines, whether air-cooled, water-cooled or connected to a remote condenser, together with the bins they sit on, are what we service for this manufacturer.
Reduced output, small cubes and extended harvest times on a Manitowoc are almost invariably caused by scale or a soiled condenser before any component has actually failed. An idle ice machine directly affects revenue at a bar or restaurant, so tell the dispatcher it is a commercial machine and when service hours are. Manitowoc ice machines are built to produce ice without pause, and the quality of their incoming water governs how they age, so on a well supply or without water treatment, descaling becomes a routine maintenance task rather than an occasional one.
Questions
Questions about Manitowoc repair
How often should a commercial ice machine be descaled?
The maker sets a minimum interval, but local water hardness and the volume produced decide the real schedule. Our technicians can advise on frequency once they have seen the condition of the evaporator and water circuit.
Can the work be done outside our busiest hours?
We try to schedule commercial visits around service periods. A full cleaning takes the machine out of production for a while, so planning it ahead is advisable.
Arrange Manitowoc service
Read us what the Manitowoc indicator lights or display show before we visit.