Jump to main content

Appliance repair across Greater Houston

Bertazzoni logo

Bertazzoni appliance service in Greater Houston homes.

Bertazzoni dual-fuel ranges combine brass gas burners with an electric oven, so ignition and element faults both occur. We diagnose on site, quote a fixed price, and state any wait for parts from Italy.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Built-in & Professional

Bertazzoni appliances our technicians service

Common Bertazzoni failure points

  • Burner ignition or electrode faults
  • Thermostat or oven element faults on dual-fuel ranges
  • Wait times on parts shipped from Italy
  • Worn door hinges or seals
  • Gas valve or thermocouple faults

The line-up

The Bertazzoni line-up, appliance by appliance

Bertazzoni is a family-run Italian manufacturer based in the Emilia-Romagna region, with a long history in cooking equipment. The brand is associated with Italian design and professional-style cooking.

Range & StoveBertazzoni ranges are offered in gas, dual-fuel and induction versions across several widths and finishes.
CooktopIts gas cooktops use multi-ring burners suited to both high-heat searing and gentle simmering.
OvenThe built-in wall ovens are electric and offer convection modes in a European format.
RefrigeratorBertazzoni refrigeration is designed to complete a matched kitchen, including built-in, panel-ready designs.

Bertazzoni installation and access

Bertazzoni ranges are heavy freestanding units often set flush between cabinets with a backsplash close behind, so floors and finishes are protected before the range is drawn forward. Wall ovens are mounted into cabinet cut-outs, and our technicians check the anti-tip and mounting hardware on reinstallation.

Common Bertazzoni faults and what we check

A burner clicks continuously even after it lights.Cooktop
Moisture or spillover near the igniter, a damp switch at the knob, or a burner cap seated off-center are the usual causes technicians check.
The burner flame dies when the knob is released.Range & Stove
The thermocouple and its position in the flame are checked, along with the safety valve it controls.
The convection fan runs noisily or stops turning.Oven
The fan motor bearings, the blade fit on the shaft and any debris in the rear housing are inspected.
Oven temperature differs noticeably from the setting.Range & Stove
The oven sensor or thermostat is tested and the door seal is checked for gaps before any recalibration.

Looking after Bertazzoni appliances between visits

  1. 01Dry burner caps and heads fully after cleaning before relighting.
  2. 02Seat each burner cap precisely so the flame spreads evenly.
  3. 03Clean the oven door glass and seals with non-abrasive products.
  4. 04Avoid letting boil-overs run into the burner ports.

Error codes

Service notes for Bertazzoni equipment

Bertazzoni manufactures professional-style ranges in Italy. Our technicians most often replace three groups of parts: the igniters and the spark module; the thermocouple, when a burner will not stay alight once you let go of the knob; and the convection oven's elements and fans.

  • Professional series
  • Master series
  • Heritage series
  • Dual-fuel and induction ranges

Safe checks to make before calling

  • • If a burner will not stay alight once you let go of the knob, its thermocouple has either failed or is no longer positioned in the flame.

Technical notes

What Bertazzoni repairs involve

Bertazzoni owners can book us for the Italian maker's ranges, cooktops, stoves and ovens, and for its panel-ready built-in refrigerators and dishwashers.

Bertazzoni manufactures its ranges and cooktops in Italy with brass burners and an uncomplicated mechanical arrangement, which makes burner and igniter service simpler than on professional equipment dominated by electronics. The oven cavity of a Bertazzoni follows a conventional element-and-fan design, so when it fails to maintain temperature our technicians test the temperature sensor, the elements and the door seal. Bertazzoni distributes parts through a narrower supply network than the large manufacturers, so lead times are confirmed before you decide on a range or oven repair.

Questions

Questions about Bertazzoni repair

Why must the knob be held in to light a Bertazzoni burner?

The burners use a flame-failure safety device that needs a few seconds of heat before it keeps the gas valve open. If a burner will not stay lit after a reasonable hold, the thermocouple or valve should be checked.

Can my dual-fuel range be repaired if only the oven has failed?

Yes. The gas cooktop and electric oven are separate systems, and the oven can be diagnosed and repaired on its own.

Arrange Bertazzoni service

Tell us which Bertazzoni series you own, such as Professional, Master or Heritage, and whether it is gas, dual-fuel or induction.

Call, any hour(832) 476-8009Book on the web