AGA appliance service in Greater Houston homes.
- Fault found before any price
- One fixed price you approve
- 90-day parts warranty
Phones answered now
- 1You callany hour
- 23-hour windowagreed with you
- 3Fixed pricebefore any work
Free to request · 3 steps
Request a repair appointment
Takes about a minute. There is no charge to submit a request.
- Diagnosis
- The cause is identified before any price is given
- Approval
- One fixed price, and work begins only with your consent
- Hours
- Our phones are answered 24 hours a day
- Warranty
- Parts warranted for 90 days, labor for 30
Built-in & Professional
AGA appliances our technicians service
Common AGA failure points
- Burner and control faults on oil-fired and gas-fired models
- Thermostat or heating element failures on electric models
- Heat loss through deteriorated insulation or door seals
- A long warm-up period after any repair that requires the cooker to cool
- Blocked flue or combustion air path
The line-up
The AGA line-up, appliance by appliance
AGA is a British cast-iron range cooker originally developed in Sweden and long manufactured in England, now part of the Middleby group. It is recognized by its enameled iron body and the radiant heat style of cooking that sets it apart from conventional ranges.
| Range & Stove | The traditional AGA cooker is a range in which ovens of differing temperatures are fixed by their position relative to the heat source rather than by a dial. |
|---|---|
| Oven | Each AGA oven cooks by radiant heat from the surrounding cast iron, which is why food tends to stay moist and why oven behavior depends on the health of the whole cooker. |
| Cooktop | The hotplates under the insulated lids are machined iron surfaces that also lose heat whenever the lids are left open. |
AGA installation and access
An AGA weighs far more than any conventional range, so it is never casually moved; service is carried out in place, often working through the front and top panels. Fuel connection, flue route and floor support are all part of the installation, and our technicians confirm the fuel type and venting arrangement before arriving so the right tools and parts come on the first visit.
Common AGA faults and what we check
- The whole cooker runs cooler than it used to, and roasting takes longer.Range & Stove
- Technicians check the heat-input side first: burner condition or element output, thermostat setting, and whether the insulation inside the casing has slumped or been disturbed.
- The boiling plate recovers slowly after a pan has been on it.Cooktop
- Slow recovery generally reflects reduced stored heat, often from a lowered thermostat setting, lids left raised, or a fuel-side fault that is starving the core.
- There is a smell of fumes or soot in the kitchen.Oven
- On gas and oil models this calls for a flue and combustion check, including the burner, the draft and any obstruction in the chimney or flue liner.
- The cooker has gone out and will not relight.Range & Stove
- The ignition and flame-proving components on gas models, or the oil supply and burner on oil models, are inspected before any control is replaced.
Looking after AGA appliances between visits
- 01Keep the insulated hotplate lids down when not cooking to preserve stored heat.
- 02Arrange routine burner and flue servicing on gas and oil models rather than waiting for a fault.
- 03Clean spills on the enamel promptly with products suited to vitreous enamel.
- 04Check the oven door seals for gaps that let heat escape.
Technical notes
What AGA repairs involve
For AGA heat-storage cookers, we work on the ovens and hotplates of gas, oil and electric models, which makes us useful on AGA ranges, stoves and cooktops alike.
The wearing components on an AGA are the heat source, whether burner or element, the thermostat governing it, and the door hinges and seals, while the cast iron itself is effectively permanent. AGA cookers enjoy long service lives with correspondingly long parts support, and the question of replacement seldom arises, since removing one amounts to a construction project. An AGA is a heat-storage cooker rather than a conventional range, consisting of a massive cast-iron body held at temperature continuously, and its diagnosis differs fundamentally from that of an ordinary oven.
Questions
Questions about AGA repair
Why does an AGA take so long to come back up to temperature?
The heat lives in a large mass of cast iron, and refilling that mass is slow by design. After any service that requires a cool-down, clients should plan on the cooker being out of normal use for much of a day.
Can an older AGA be serviced rather than replaced?
In most cases, yes. The cast-iron body rarely wears out, and burners, thermostats, seals and insulation are serviceable, so the cooker can often be returned to good order.
Arrange AGA service
Tell us first whether your AGA runs on gas, oil or electricity, because the parts and the checks differ.