Jump to main content

Appliance repair across Greater Houston

Blomberg logo

Blomberg appliance service in Greater Houston homes.

Blomberg's ventless heat-pump dryer has no outside vent, so it fails at a lint-clogged condenser, a water path or a drain pump. Our technician finds which in your home and prices it once.
  • Fault found before any price
  • One fixed price you approve
  • 90-day parts warranty

Free to request · 3 steps

Request a repair appointment

Takes about a minute. There is no charge to submit a request.

Prefer to call?(832) 476-8009
Step 1 of 3: Appliance and fault

Appliance and fault

01Which appliance needs attention?
02What is it doing?Select an appliance first and its common faults will appear here.
Diagnosis
The cause is identified before any price is given
Approval
One fixed price, and work begins only with your consent
Hours
Our phones are answered 24 hours a day
Warranty
Parts warranted for 90 days, labor for 30

Premium

Blomberg appliances our technicians service

Common Blomberg failure points

  • Heat-pump condenser clogged with lint
  • Pump or condensate drain faults on ventless dryers
  • Clogged drain pump or filter on washers
  • Worn door lock or interlock
  • Tight compact installations limiting access

Error codes

Service notes for Blomberg equipment

Blomberg is a European compact appliance line made by Arçelik. It suits high-rise condos, townhome laundry closets and garage apartments that cannot take anything wider than 24 inches, mainly as stacked compact washers and ventless heat-pump dryers. Typical repairs involve a pump that fails to drain, a faulty door lock, a heating fault, or a lint-clogged condenser.

  • Compact 24-inch washers and dryers
  • Heat-pump dryers
  • Dishwashers
  • Bottom-freezer fridges
  • Ranges and cooktops

Safe checks to make before calling

  • • If a ventless dryer is drying slowly, clean both lint filters, then empty the condensate container or make sure the drain hose is unobstructed.

Technical notes

What Blomberg repairs involve

Blomberg is chiefly a compact 24-inch line, and we repair its washers, ventless dryers, counter-depth refrigerators and freezers, dishwashers, plus cooking appliances: ovens, ranges, stoves, cooktops and microwaves.

Compact laundry is usually installed in confined closets, so withdrawing the machines and reconnecting them properly forms a genuine part of the work. Blomberg produces 24-inch washers, dryers and dishwashers proportioned for European kitchens, and for that reason they turn up in condos, apartments and townhome laundry closets where a full-size pair will not fit. Since a Blomberg heat-pump dryer does not vent outdoors, slow drying calls for inspection of the lint and condenser filters, the condenser and the heat-pump circuit.

Questions

Questions about Blomberg repair

Why is my Blomberg heat-pump dryer taking so long?

Most slow drying on a ventless dryer is lint. Clean every lint filter the manual lists, empty the water container or check that the drain hose is clear, and give the closet enough air. If drying is still slow, the condenser or the heat-pump circuit is examined.

Does a ventless Blomberg dryer need an outside vent?

No. A heat-pump dryer condenses the moisture into a container or a drain line and recirculates its air, so it can go where no duct can run. It does give off some heat, so a closed closet needs the clearances in the installation guide.

Who makes Blomberg appliances?

Blomberg belongs to Arçelik, the Turkish group that also owns Beko. Parts are specific to the model, so they are matched by the model and serial number on the rating label.

Arrange Blomberg service

Tell us how your Blomberg is fitted, stacked or side by side, in a closet or under a counter, so the visit allows for access.

Call, any hour(832) 476-8009Book on the web